Speed Jet – Why doesn’t my robot cover the entire pool?

Please be sure to place the robot into the shallow end of the pool. Run the robot in the water without the filter bag/bags for one or two minutes in a clean section of the pool. If the robot runs normally, without the filter bags, then the filter bags may be clogged. Wash the filter […]

Read More

Speed Jet – Why doesn’t my robot reverse?

Turn on the power supply. Listen for clicks in the power supply (the power supply will make a clicking noise every time the internal timer activates, causing the robot to reverse or change direction). Can you here the clicking? If Yes: Bring the robot close to the water line. Observe that the water is coming […]

Read More

Speed Jet – Why is my robot not moving or pumping water?

Check if the power supply is plugged into the wall outlet and electricity is getting to the power supply. If the power supply is receiving electricity and the LED light is turned on (either small or large pool) try running the robot in the water without the filter bag/bags. If the robot runs normally, without […]

Read More

Why does my robot fall backwards when climbing the wall of my pool?

Remove any obstructions from the pool walls (ladders) if necessary. The robot could be hitting the obstructions and falling backwards. Clean the filter baskets, they may be clogged. Try running the robot without the filter baskets and see if the robot operates normally. Check the handle buoyancy. Place the robot into the pool, the handle […]

Read More